Test & Validation Systems
Select instruments for electronic design, embedded debug, RF measurement, power analysis, device characterisation and data acquisition.
Start with what you need to test
Debug embedded electronics
Capture analogue, digital and serial-bus behaviour during board bring-up.
Explore systems →Validate power electronics
Exercise sources, converters, loads and switching stages with correlated measurements.
Explore systems →Characterise RF & microwave systems
Analyse spectra, networks, signal paths and switched RF configurations.
Explore systems →Characterise semiconductor devices
Source, load and measure electrical behaviour during device evaluation.
Explore systems →Build automated test systems
Combine programmable instruments and acquisition for repeatable validation.
Explore systems →Log signals over time
Record temperature, voltage and current for long-duration investigation.
Explore systems →Perform field diagnostics
Take capable waveform and mixed-signal measurement beyond the bench.
Explore systems →Explore five measurement areas
Oscilloscopes & Mixed-Signal Test
Bench, PC-based, high-resolution, precision and handheld families.
View technology →
Signal Generation
Function, arbitrary waveform and RF signal generation.
View technology →
RF & Microwave Measurement
Spectrum, vector-network, RF generation and switching platforms.
View technology →
Power & Device Test
DC sources, loads, precision measurement and digital multimeters.
View technology →
Data Acquisition & Logging
Voltage, current and temperature acquisition for lab and field workflows.
View technology →Selected instruments for demanding measurement workflows
SDS800X HD Series
Compact 12-bit oscilloscopes for embedded debug, teaching laboratories and general-purpose bench measurements.
PicoScope 3000E Series
Four-channel USB oscilloscopes with MSO options for embedded systems, serial buses and long-record analysis.
SDS3000X HD Series
High-resolution oscilloscopes for power electronics, motor-drive analysis and mixed-signal system development.
PicoScope 2000 Series
Portable USB oscilloscopes for education, field measurement and embedded-electronics troubleshooting.
PicoScope 4444
Differential-input USB oscilloscope for floating measurements, power conversion and three-phase electrical systems.
SDS1000X HD Series
Accessible 12-bit bench oscilloscopes for development laboratories, education and routine signal analysis.
TC-08 Thermocouple Logger
Eight-channel USB temperature logging for thermal validation, environmental recording and long-duration tests.
SSA3000X Plus Series
Spectrum-analysis platform for RF debugging, interference investigation and pre-compliance measurement.
Oscilloscopes
Bench, PC-based and handheld oscilloscopes spanning 50 MHz to 8 GHz, with up to 12-bit high-definition acquisition for embedded-system debugging, power-electronics analysis, RF time-domain measurements, serial-bus decoding and advanced signal validation.
SIGLENT — High-resolution Bench (12-bit HD)
SIGLENT — Standard Bench Oscilloscopes
Pico Technology — PC-based USB Oscilloscopes
SIGLENT — Battery-operated Handheld Oscilloscopes
Waveform Generators
Function and arbitrary waveform generators from 10 MHz entry-level instruments to 5 GHz high-performance AWGs, with 2- and 4-channel configurations, up to 10/12 GSa/s sampling, 14- to 16-bit resolution, EasyPulse, burst, modulation, IQ and PRBS capabilities for circuit stimulation, serial-bus simulation, RF and mixed-signal testing, radar waveform generation and semiconductor validation.
Spectrum Analysers
Bench, real-time and handheld spectrum analysers covering up to 7.5 GHz, with real-time signal capture, low-noise measurements, EMI pre-compliance tools, phase-noise analysis and optional VNA or cable-and-antenna functions for wireless development, 5G NR sub-6, Wi-Fi 6E, interference hunting, RF infrastructure installation and field diagnostics.
Vector Network Analysers
PC-based, benchtop and handheld vector network analysers covering 300 kHz to 26.5 GHz, with 2-port and multi-port configurations, full S-parameter measurements, Smith charts, group delay, time-domain analysis and fixture-compensation workflows for antennas, cables, filters, amplifiers, RF components and multi-port network characterisation.
RF Switching and Source/Measure Systems
RF switch matrices provide programmable signal routing for automated multi-port measurement systems. Source/measure units provide precision current-voltage sourcing, measurement and sweep capability for semiconductor and component characterisation.
RF Signal Generators
Analogue and vector RF signal generators provide controlled continuous-wave, modulated, pulsed and arbitrary-waveform stimulus for receiver, component, communications and automated RF validation.
DC Power Supplies
Programmable single-, triple- and four-channel DC power supplies, together with high-power switching platforms up to 1.5 kW, for board bring-up, multi-rail electronics development, automated power testing, battery simulation, EV component validation, burn-in and production test.
DC Electronic Load
Programmable DC electronic loads with constant-current, constant-voltage, constant-resistance and constant-power operating modes, waveform display and remote-control capabilities for power-supply characterisation, battery discharge analysis, transient testing, protection verification and DUT qualification.
Digital Multimeters
Bench and system digital multimeters from 4½- to 6½-digit resolution, with high DC accuracy, fast reading rates, LAN, USB and GPIB connectivity, data logging and rack-integration support for laboratory measurement, QA, calibration, production test and automated test systems.
Data Loggers & DAQ
USB data-logging and data-acquisition platforms for thermocouple and RTD temperature measurement, multi-channel voltage acquisition, precision 20- and 24-bit differential measurement, current monitoring, energy auditing and three-phase motor diagnostics, with PicoLog software for long-duration recording, analysis and reporting.
