Cleanroom Validation · Filter Integrity · Particle Monitoring · Airflow

Cleanroom validation and monitoring in one connected product path

Primionics combines Topas validation tools and Kanomax monitoring instruments into one practical cleanroom solution: aerosol challenge, filter integrity, particle counting, airflow verification, and ongoing monitoring.

Aerosol generation Filter integrity Particle counting Airflow verification Remote monitoring IAQ

Discuss your application View filtration products

Validation and monitoring in one product path

This solution combines two product layers. Topas covers validation: aerosol generation, dilution, filter integrity testing, airflow visualisation, and cleanroom qualification. Kanomax covers routine operation: particle counting, remote monitoring, airflow checks, and IAQ spot checks.

That gives customers one practical path from acceptance testing to day-to-day cleanroom monitoring, instead of splitting the requirement across unrelated tools.

Topas for cleanroom validation, filter integrity, and airflow visualisation
Kanomax for particle counting, installed monitoring, airflow, and IAQ
Clear grouping for qualification, routine monitoring, and troubleshooting
Product sets aligned to cleanroom and controlled-environment use

Solution coverage

Aerosol generation Dilution Particle counting Remote monitoring Airflow IAQ

Validation sideATM 228, DIL 544, CPA 341, SYS 529, CFG 291, CRQWin

Monitoring side3888/3889, 3905/3910/3920, 3716A/3717A, 6006/6036/6501, 6710, 2212

Core standardsISO 14644, ISO 14644-3, EN 1822, ISO 21501-4, GMP Annex 1

Use case fitQualification, monitoring, airflow checks, investigations

Workflow capabilities

What this combined workflow covers

Aerosol generation & conditioning

Controlled aerosol generation and dilution for repeatable upstream challenge conditions during cleanroom validation.

Filter integrity testing

Probe-based leak testing workflows for installed HEPA and ULPA filters in cleanroom and controlled-air systems.

Portable particle counting

Handheld and portable particle counters for classification checks, troubleshooting, and routine cleanroom monitoring.

Installed cleanroom monitoring

Remote particle sensors for continuous contamination monitoring where manual rounds are not enough.

Airflow & balancing

Anemometers and capture hoods for air velocity, diffuser checks, balancing, and controlled-air verification.

IAQ & environment

IAQ instruments for CO, CO₂, humidity, temperature, and field investigations around technical spaces.

Application areas

Cleanroom and controlled-environment programmes

Semiconductor Facilities

Validation, contamination control, and ongoing cleanroom monitoring.

Pharma & Biotech Cleanrooms

Filter integrity, qualification, and routine cleanroom monitoring.

Electronics Manufacturing

Portable checks and installed monitoring for contamination-sensitive spaces.

HVAC Testing & Commissioning

Airflow, diffuser, and controlled-air verification across projects.

Research & Technical Labs

Controlled aerosol, particle analysis, and repeatable test conditions.

Healthcare & Controlled Spaces

Clean-air acceptance, monitoring, and filter-focused evaluation.

Aerosol generation, filter integrity, and qualification

Product-led validation sets for cleanroom acceptance, filter leak testing, recovery testing, and airflow visualisation.

QUALIFICATION SET

Cleanroom Validation Set

Core Topas set for cleanroom qualification and filter leak testing using ATM 228, DIL 544, CPA 341, SYS 529, and CRQWin.

ISO 14644-3Filter leak testQualification

ATM 228 + DIL 544

Aerosol Challenge & Dilution Set

Controlled upstream aerosol generation and 1:100 dilution for cleanroom validation and installed filter testing.

Aerosol challenge1:100 dilutionMobile use

CPA 341 + SYS 529

Particle Measurement & Scan Probe Set

Particle counting and rectangular scanning probe combination for HEPA/ULPA leak detection and cleanroom acceptance work.

Particle counterLeak scanningInstalled filters

CFG 291

Airflow Visualisation Set

Fog generation for flow visualisation, dead-spot detection, and pressure cascade checks during cleanroom validation.

Flow visualisationISO 14644-3Commissioning

CRQWIN

Cleanroom Qualification Software

Software-backed support for recording, evaluating, and reporting cleanroom qualification measurements.

ReportingQualificationWorkflow support

Particle counting, airflow, and IAQ

Customer-facing product groups for routine cleanroom monitoring, airflow verification, and environmental checks.

3888 / 3889 / 3889-01

Handheld Particle Counters

Handheld particle counting for quick cleanroom checks, troubleshooting, filter testing support, and sensitive environment verification.

HandheldISO 21501-42.83 L/min

3905 / 3910 / 3920

Portable Particle Counters

Portable cleanroom particle counters for room certification, classification, and higher-flow monitoring needs.

28.3 / 50 / 100 L/minPortableISO 21501-4

3716A / 3717A

Remote Particle Sensors

Installed 2-channel particle sensors with analog output for continuous cleanroom and facility monitoring.

4–20 mARemote monitoringPLC / BMS

6006 / 6036 / 6501

Airflow Verification Instruments

Hot-wire and multi-function airflow instruments for cleanroom airflow checks, balancing, and technical investigations.

Air velocityBalancingField checks

TABMASTER 6710

Capture Hood for Diffuser & TAB Checks

Capture hood measurement for supply and return airflow verification in HVAC and controlled-air systems.

Capture hoodTABDiffuser checks

2212

IAQ Monitor

Spot-check instrument for CO, CO₂, temperature, and humidity, with calculations for dew point, wet bulb, and outside air percentage.